---
title: Lampe Maker Space
description: "[![Take a look at the 118 Lampe Maker Space Virtual Tour](https://academics.design.ncsu.edu/it/wp-content/uploads/2022/07/NCSU_Lampe_118_002-scaled.jpg)](https://academics.design.ncsu.edu/it/118-lampe-industrial-design/) [**Take a look at the 118 Lampe Maker Space Virtual Tour**](https://academics.design.ncsu.edu/it/118-lampe-industrial-design/) ### **The Lampe Maker Space is located in Room 118, 111 Lampe Drive** #### ***Fall 2023 hours are:*****Monday…"
url: "https://academics.design.ncsu.edu/it/docs/lampe-maker-space/"
updated: "2023-09-29"
category: Digital Fabrication / 3D Printers
tags:
  - 3D printers
  - filaments
  - laser cutter
  - scrap trap
  - vacuum forming
---

# Lampe Maker Space

[![Take a look at the 118 Lampe Maker Space Virtual Tour](https://academics.design.ncsu.edu/it/wp-content/uploads/2022/07/NCSU_Lampe_118_002-scaled.jpg)](https://academics.design.ncsu.edu/it/118-lampe-industrial-design/)
[**Take a look at the 118 Lampe Maker Space Virtual Tour**](https://academics.design.ncsu.edu/it/118-lampe-industrial-design/)

### **The Lampe Maker Space is located in Room 118, 111 Lampe Drive**

#### ***Fall 2023 hours are:*****Monday - Friday 11am - 4pm** *Appointments for studio reservation and technology consults are available by request.
 *****Lasercutters are currently offline during studio hours at the Lampe Maker Space.***

#### ***Contact one of the [Full Time staff members](https://go.ncsu.edu/design3dprinting) for consultation/assistance.
 Fill out the [Request 3D Printing Service Form](https://go.ncsu.edu/design3dprinting) to have your file(s) processed for 3D printing in the lab.***

For list of approved 3D print filaments that have been tested with the Fusion3 F410 3D Printer please visit:
 [**https://go.ncsu.edu/lampe_fusion (PDF Document)**](https://go.ncsu.edu/lampe_fusion)

Please note that the Maker Space is unable to print ABS plastics, or any listed filaments with corrosive additive materials such a metal fills, or carbon fibers.

*Direct access to the 3D printers is not available to users. **Please plan ahead. ****You may be able to print directly to the [MakerBot Sketch 3D printers in the hybrid computer clusters](https://academics.design.ncsu.edu/it/docs/makerbot-sketch/) or access the [Ender 3 V2 Pro 3D printers in Lampe Digital Fabrication Studio](https://academics.design.ncsu.edu/it/docs/lampe-maker-space/).*

Please email us ([design_digitalfab@ncsu.edu](mailto:design_digitalfab@ncsu.edu)) before purchasing filaments for use in the Maker Space use to insure we can support them properly. In addition, your prints may be free as some disciplines and faculty members have pre-purchased filament/resin materials for student use within a studio/class.  A short list of approved PLA/PLA+/PETG vendors is also available on our **[3D Printing Filament Guideline here](https://academics.design.ncsu.edu/it/docs/3d-printing-filament-guideline/)**.

Please contact Jason Whitman ([design_digitalfab@ncsu.edu](mailto:design_digitalfab@ncsu.edu)) with any additional requests, maintenance needs, or questions.

 *Jason Whitman* Digital Fabrication and Innovation Specialty Trades Technician NCSU College Of Design  design_digitalfab@ncsu.edu  Office: 919.515.2924

[![Take a look at the 111 Lampe Drive Virtual Tour](https://academics.design.ncsu.edu/it/wp-content/uploads/2022/07/LampeHall_entrance.png)](https://academics.design.ncsu.edu/it/111-lampe-drive-industrial-design/)
**[Take a look at the 111 Lampe Drive Virtual Tour](https://academics.design.ncsu.edu/it/111-lampe-drive-industrial-design/)**